Product advantage

- Comply with US RJ11 phone jack, 6P4C (six position, 4 contacts) foot position standard.

- The module is equipped with a rotary dust cover to reduce dust intrusion (IP20 rated) and reduce the failure rate of the module.

- Modules of eight different colors can be selected according to the application requirements, which comply with TIA- 606 color management standard.

- The circuit board IDC terminal adopts the solder free bonding technology (press in), which can effectively reduce the capacitance effect suppress crosstalk.

- Provide a tool free crimping cover to prevent the cable from falling off and reduce the contact caused by dust bad problems occur.

- It supports the quick installation mode of the traditional 110 threading tool and the special 4-Pair threading tool (FL-KM90T).

- The module has EIA and USOC color code stickers, which can terminate 22AWG~26AWG wire gauge cores.

Product characteristics

Shell plastic material: fire resistant ABS (in accordance with UL-94V-0)

Contact material: tinned copper

Contact plating: 50μ Gold Plated / 100μ plate with nickel

Interface plugging times: >750

IDC wiring and termination times: >200

Plug and pull resistance: minimum 11lbf (50N) between plug and interface

Contact pressure of plug and interface: 100 grams minimum for each contact

Operating temperature: -40 ℃ to +75 ℃

Insulation strength (conductor conductor):1000VAC, 60Hz/1min

Insulation impedance: >500M ohms (500VDC)

Contact impedance: <20M ohms

Rated voltage / current: 150VAC/1.5Ampere

Meet the standards

US RJ11 standard

Can be used

ISDN

ADSL

VoIP

Order information

P2.08.07_Unshielded  telephone Module（RJ11 Keystone Jack）.pdf

P2.08.07_非屏蔽电话模块.pdf